Dec 10, 2013

CANDY CANE WREATH with Instructions



Here's a cute candy cane wreath I made and the instructions are below.



I first saw this idea when my Aunt sent me a link on fb. Then I did a quick search and found it on Pinterest here. It looked super cute to be so simple that I just had to try it!

And here's how I did it.

First I headed down to the Dollar General Store to buy the candy canes, it takes 22. So I had to buy two boxes. And I needed something roundish to decorate the center and try to hide where they all come together. I didn't see anything I loved so I drove over to the Dollar Mart. And there I found the cute, clear and silver snowflake! It is simply PERFECT!


Then I got all my stuff together when I got home. 
You will need:
1.scissors
2.Hot glue gun and stick
3. Twenty two candy canes
4. A centerpiece (round is perfect)
5. Ribbon
6. And e6000 glue (optional)
7. White sparkly glitter (optional)

Okay so here we go. First, I laid all the candy canes out in sets of two, to form a circle,  like this:


And then just shove them together to form a "wreath" circle.


And next you simply just take some ribbon, I chose white, and tie them all together in sets of two, like so:

Simple so far, right!

Okay, next, after doing all 22 of these like that. I arranged them all into a circle again, and took my hot glue gun and glued them all together at the inside center circle. Each one to the next, to make a tight hold. 
I also did this to the top outer parts, where the canes form a heart shape. Just to make a stronger hold.

And then I got my plastic clear, sparkly snowflake and glued it directly onto the center of the candy canes with my E6000 glue, found in the craft section of stores. I'm sure you could probably just hot glue the star on, but I wanted to make sure it wouldn't fall of soon.

(this wasn't the pic I wanted to post, but I couldn't find the correct one where my canes were tied with ribbon! But this one will due.)

Now this e6000 glue takes a while to fully dry, but when it does, it has a strong hold!

Now you could finish up here, if you didn't want to take it a step farther like I did with the photo insert.

But since my Aunt had sent me a photo wanting this, and she recently had a son to pass away in a car accident. I thought I'd add a photo of him in the center for her. It'd be a great way for her to have his photo around during Christmas. And he use to always steal her candy canes off her Christmas tree too. So this is extra special for her.


I chose a photo from when he was younger and printed it off.
I then glued the edges of the photo to the inside of the clear snowflake, from the back side. 
I also smeared some extra glue around the edges on the inside and sprinkled all kinds of sparkly, white glitter in it.
I thought it was a good way to hide the edges of the cut photo, since the center of the snowflake was clear.

Also, this is where I found some little red pip berries in my craft box, and hot glued them to the white ribbon ties.
You could use jingle bells, little fake presents or bows. Just about anything to dress them up a bit.

And lastly, the final step was to simply add a piece of ribbon to the top, to be able to hang it by.
I just tied on a piece like below:


And that is all there was to it!
My Aunt loves it and it is a great way for her to keep her son's spirit around at Christmas.


Hope ya'll like it!
And by typing out these steps, it makes it seem way more complicated than it is.
Believe it, it's simply tieing two candy canes together, hot glueing them and assembling it all.
Very Easy!

If you do give this a try, I'd love for you to send me a link or photo of it!

I gave this one to my aunt but I'm making more that's on the way to my Craft Booth #555 and Etsy where they can be purchased as a great, unique gift!

See ya'll next time,
~Lisa

Oct 21, 2013

Old Crow Primitive Toolbox


These old looking toolboxes are a hot seller in my Peddlers Mall booth. Usually as soon as I make one, the tend to sale within 2-3 days.

I display them in ways to show how they are actually useful. Usually I tuck a handful of Country Sampler magazines in them. But for some of the cuter ones I've made, I tucked hand towels in them in the gingham pattern. A cute addition to a country kitchen, I thought. And you could also stash away some vintage kitchen utensils in these.

Anyways, I love making these little old looking toolboxes.  Keep in mind that I do not go by exact measurements on these. I just kind of wing it when cutting the boards. I think it gives a more prim look anyways.

And I almost always finish them off by stenciling on some type of design. For this one I chose the old black crow and black stars theme.

And here it is sitting beside a tobacco stick, tabletop tree with matching yellow pip berries:


Happy Crafting Ya'll!




You may also like these Primitive Crafts:


Primitive Tobacco Stick Grapevine Tree

Tobacco Stick Chair



Americana Tobacco Stick Flag

 

 

 

 

 

 

Primitive Barnwood Tool Box

Primitive Tobacco Stick Grapevine Tree


I recently posted about how to make a Tobacco Stick Tree out of old tobacco sticks. Well, today I'm going to share with you the process of how I take this a step further by adding grapevine. And turning those old, unwanted tobacco sticks into a cute Tobacco Stick Grapevine Tree.
A row of old tobacco sticks after I had washed them. I try to pick close sizes when working with them.

Since making this very first tobacco stick grapevine tree, like this, I've made many more with a few different options now. I prefer the skinnier ones like this:


And here it is when I was just toying with some grapevine on it:

And I started to like it. So I added a few more strands to fill it in. And it started to look like this:
Then I had to add even more grapevine to hid the legs, which I was planning on leaving showing, but it looked weird. And I also started to tie in some sprigs of pip berry garland to add more interest, like this:

 The grapevine garland comes in rolls and looks like this when unrolled:

I didn't want to overload it with the grapevine garland so much that it would hide the tobacco sticks. I think they look kinda cute showing through. Here it is all done with everything except the lights.



And my latest one is now a tabletop version for those spots where we just don't have enough room for the full size. Here is the beginning of my very first ever, tabletop tobacco stick tree without any decorations so you can see the basic frame:

And here is the same one, tabletop version with a bit of grapevine garland just strung on. So you start to get the picture:
I'm still working on this one, :-) 
here's an update pic now:

But here's a few below that I have recently finished and sold:

This one with yellow pip berries was a trial and error. I took sprigs of pip berries and put them on one by one instead of stringing the strands of garland.


I didn't want to hide all the tobacco sticks. 


And here's another shorter, tabletop kind with grapevine, star lights and pip berries:

Small, skinny and plain. Love this one.



I made these to sell in my Peddlers Mall Booth #555,

Here's some other things I've been making too, if you are interested.


Primitive Crafts:

Tobacco Stick Chair




Americana Tobacco Stick Flag

 

 

 

 

 

 

Primitive Barnwood Tool Box

 

Happy Crafting Ya'll! 
-Lisa 




Oct 10, 2013

Cheap Craft Show Display Cabinet

Since I sell many little items and crafts in my Booth #555 at the Peddlers Mall, I am always in need of more shelving. And the other night at a local auction, I won this little white night stand for only $5.

Sure it needs some work, (has a top drawer missing!) but for $5 I knew I could do something with it. It's real wood, so it's sturdy. Something you don't hardly find now a days. lol.

I took one can of Walmart brand black spray paint to it.

Then just roughly sanded all the edges after it dried. I liked it like that so I left it. And where the top drawer was missing, I just stapled in a strip of black and white fabric.


I got the idea to use some pine boards because we are currently remaking our kitchen and I just laid a piece on the top of the nightstand, and liked it. So it just went from there. And believe me, I do not do exact cuts and measurements. I'm bad with that stuff, but this one still turned out good. The pine boards are really easy to cut with just a simple jig saw. I used a few more 1x3 pine boards (maybe for trim?) and kinda just doodled a little drawing, in the shape of a basic ladder, kinda. lol. and just cut cut cut until I got it to looking like a little shelf. That is what I am putting on top of the night stand to give it height and extra storage/display in my booth.
 

And here's what I came up with.
It's perfect to add extra height in my booth and the shelves, even though small, lets me add extra items! I love it.

And for the back. I went out into the garage, searching for something to make it a little bit more sturdy. And guess what I found. I had a black bookcase sitting out there holding on VHS Disney tapes. Lol. So I turned it around and removed half of the backing from that. Since it's not holding nothing great, I won't really care if it has a back or not. And I cut the cardboard type backing with regular scissors. That stuff is very thin! But it worked great!

And once again, here's the before:

 And here's the after:

 

Hope you got some inspiration from this and can maybe turn an old broken piece of furniture into something useful in your home or your craft booth!

Happy Crafting Ya'll!

Oct 8, 2013

Primitive Bench

Here's the latest addition to my items for sale in my Booth #555 at the Peddlers Mall. It's a piano bench that I redid into the primitive theme.

And here it was before the makeover:



I first I tried to leave it in the off whiteish/light brown base with sage stars and red writing, and then I hated it!


Next, I painted it all over again in the black and loved it. Especially after I took sand paper and scruffed up all the edges to make it a little worn looking.

And here it is again, the second time I tried, lol. And definitely the best of the two.


Don't forget to like my Booth #555 on Facebook for the latest items!

 
 
And here's a few other things that I'm working on and will be putting in my booth this week, if' you'd like to take a look:
 
 

If you'd like to see another one of my piano bench remakes, here's the link:

Old Piano Bench Repurposed


Happy Crafting Ya'll!
 

That Blonde Girl Template by Ipietoon Cute Blog Design