Showing posts with label stamps. Show all posts
Showing posts with label stamps. Show all posts

Sep 2, 2015

MASON JAR LID MAGNETS


MASON JAR LID MAGNETS

These are some cute ideas that I had from having lots of extra Mason Jar lids.
(The rings I am going to also use on an upcoming post, so stay tuned!)
If you don't have any lids laying around, don't worry. You can find a box of 24 (both lids-12 and rings-12) at Walmart for around $2.50.
I had some left over from trying my first ever Bread N' Butter Pickels

First I simply just laid them out on and gave them a base coat of red in Rustoleum spray paint. 
Let it dry and sometimes if it didn't cover totally, I went back and did a second coat. (I'm not a great spray painter.)

And then I took a can of white spray paint and did the speckle effect.  
I do this by just barely putting any pressure at all on the spray nozzle and just holding it there. 
It will finally start to spit and spray and soon little specks of white paint will fly out like snow.  Just hold the can over what you want to spray and let it spit.  It looks cool!

Some of them, I just sprayed them white and then re-speckled the white again. Leaving out all red.
Just to make some different.

Then I took out my large Mason Jar stamp I got from eBay.

Dabbed it in black ink and while holding the lid in my hand, stamped it on.
I had to keep it in my hand so that I could apply the pressure evenly from the back of the lid.
Laying them on hard surfaces didn't work too good for me.

Notice not all of the center was stamping great on them. So that's where I started pressing harder from the back.

And after letting them sit and dry for about a good hour, because of the ink.
I went and attached a round magnet, size 3/4" (19mm diameter) that I got from Walmart. A package of 52 costed like $3 or so.  They have a really good strong hold. I do not recommend those peel and stick strips for things like this.
The glue I used is called E-6000 and it forms a very strong hold!
I use if for most everything.


 Here are some more pics of them done.





 These were the large mouth lids, if I forgot to mention that. That's why I used such a large stamp.
I also have a smaller stamp that I am going to make the regular mouth lid magnets with also.
I just have to go find it now. lol.
(I am a stamp collector also!)

If you like these but don't want to try making them, 
I listed a few "buy it now's" on eBay here  for $9.99 with free shipping.

Hope ya'll give this cool Mason Jar Lid Magnet craft a try.  I figured they will look cute in about any kitchen!

I'm trying something new and linking up with Made by You Mondays to share in a linky linkup.

See Ya'll next time!
~Lisa

UPDATE:
Maggie from EyeballsbyDayCraftsbyNight asked me below, if these smear.
With regular handling mine don't. 
But after she asked, I went back and took my thumb and kept rubbing into it and yes, they started to smooth out on the sharp lines.
So, if you want to take this a step farther, you can finish them off with some type of sealer or spray clear coat even. 
I think I will give mine a coat to be safe.
Thanks Maggie, for thinking of this! 

Feb 15, 2013

Grungy Tags Recipe Without Tea or Coffee

I've been making my own old grungy tags for a while now. And I've seen many posts on ways to get the grungy look. Some of them involve coffee, some involve tea or such. Well, my recipe doesn't use either. It may be since I don't drink either. lol. And I've just learned to try to use what's close at hand. Oh, in the past, I did however borrow some coffee from my aunt and tried that, but I didn't like the smell.

Anyways, here's how I make my new white string tags look old and grungy.

I start out with these stark, white tags found in the office section at WalMart:

Then I mix up a bowl of "grungy stuff." It consists of approximately 75% water and 25% Apple Barrel acrylic paint, in the color of Nutmeg Brown. The water is a little thick, when I get it just right.
Then I dip each one in the mix and lay them out on an old cookie sheet. Then I even take my paintbrush and dab on extra "grungy stuff," to make sure they are grungy enough for my liking. Don't worry about the other side, they will also get good color from the baking in the next step.
Then I set the oven to 400* and stick them in.
And then I wait. Keeping a good eye on them, since I have the oven at 400*. Usually it only takes about 8-10 minutes until they start to crisp up and appear totally dry. Mine usually look like this below:

And then after I let them cool for a minute or two, I get out my stamps and ink. I like to use the "Old Crow," bird stamp and the "Weeping Willow Tree," stamp most of the time.

I ordered my stamps from eBay and got my ink at the local Dollar Mart. I only stamp one side so that I can put my booth # and price on the other. And to keep a clean work area, I lay out some strips of wax paper.
 
A little thing I do time to time, mostly around spring, is to add some candle "oil flavorings" (found at Walmart in the candle section) to the tags after they dry and before the stamps go on. I just brush it on with a regular paint brush. And boy, does it make my tags smell good. As soon as you walk in my Booth #555 the aroma hits you. I usually use food flavorings such as butterscotch rum to do this. I read somewhere that alot of people have allergies (including me) and yet the food smells tend to bother them way less than any flower smell. And when a shopper is smelling a great food smell, they may linger longer in your booth! lol. Here's to hopeing!

Happy Crafting ya'll.