Showing posts with label unique Christmas Gifts. Show all posts
Showing posts with label unique Christmas Gifts. Show all posts

Sep 20, 2016

DIY Home Made MOO SHINE MOON SHINE

Are ya'll ready to make some home made Moo Shine?
(Moon Shine lol)


I did. Here is how mine turned out.


These are great items to sell at craft booths/fairs.  They make for cute country gifts at Christmas. Or as a souvenir.

It was hard to photograph water in jar without it being blurry for me.

They also make adorable party favors to take home, especially for country themed weddings!

Here's how I made it.
All you need is a 
-Mason jar with a lid, (I prefer the old metal ones.)
-E-6000 Glue
-Water (from a bottle.)
-Play set with tiny, plastic cows. 

I got the one pictured above from our local Tractor Supply for only $4.99.
Not many cows in it, but I'm going to dab on some black/white spots to a few to make them look like cows.

Just take some E-6000 glue and glue the little cows to the bottom of your empty Mason Jar.
Let them dry overnight.

I used a wire to lower him down. A wire flimsy enough though to remove easily after it dried.


And then just add some bottled water.  I think using bottled water may help from getting that stink smell after it sits for a while. Guess that's the difference. Not positive but I think that's the reason to use bottled water for crafts like this.

And bam, here is your Mason jar full of MOO SHINE!
I used cold, bottled water. I wish I'd used room temperature water so I wouldn't have had the chill in the first finished picture above.



These are great items to sell at craft booths/fairs.  They make for cute country gifts at Christmas. Or as a souvenir. They also make adorable party favors to take home, especially for country themed weddings!


Speaking of "moo stuff." Yesterday was bittersweet. I said goodbye to a few of my farmland friends named, Small, Medium and Large. But I know they've really moved on to greener pastures for sure, as ours were drying up.

"As for butter versus margarine, I trust cows more than chemists." 
~Joan Gussow

Amen! Me too.
~Lisa

Sep 15, 2016

TARGET ORNAMENT GIFTS

TARGET ORNAMENTS
"Hit me with your best shot." 
-REALLY!


Hey ya'll, I've been busy making a ton of Christmas ornaments this week. And I had an idea since it is bow season (hunting) in our area, that I should make some sort of hunting ornaments that men and women hunters would like.  So this is what I came up with.


I used my metal, regular mouth sized, Mason jar lids, (not rings,) 


and spray painted them various colors.


Some even camo by spraying the base black and coming back in with spruce green here and there.

At the moment I painted the CAMO, I didn't realize they were WIDE MOUTH LIDS, so I couldn't use them with the 2" circle target cutouts. The Wide Mouth Lids need the 3" cutouts.


While those were drying,
I did a quick search and found this free image via Wikipedia to use as a center.


Then I just used Avery Print Online and uploaded the target pic into the 2" round printable project.

 Which was perfect since the regular size since these regular size jar lids are about 2 3/4", the 2 inch circle pic fits right in the center.


I used Elmers glue, lightly painting it on with a paintbrush, to the back of the cutout circles (using regular scissors,) and gluing them onto the lid.  If you get too much glue the paper will bubble.


And just stick them on in the center.


This is how it looks.


Give it a bit to dry, and then you will need to take a hole punch or a nail to puncture a hole at the top to attach a hanger.




Here's the closeup.
Just big enough to put a wire hanger through.


See the wire hanger to the right in the pic? Hard to see a bit. It's just those extra Christmas ornament hooks that come in packages of 50 or 100 at the Dollar General Stores. Perfect for this craft.

And I also wanted to package these so I took an extra step to print out bag toppers also at AVERY PRINT ONLINE.


 I added the tag line, "Hit me with your best shot."
I thought it was a cute idea.


I didn't take a pic of them in the bags, but here's is what it looks like all done.


I think since I'm bagging them up to make them a cute Christmas gift, I'm gonna price them for $1.99 each.  If I didn't bag them, so they'd be cheaper, I'd price them for just .99 cents each. And to have a place to display the un-packaged ones, I thought I needed something to hang them in. So I made this.


I used a box top off of  just an old cardboard box.


I had already started to paint it before thinking of a pic, but I got one.
Ihad just done one coat of black on the outside so far. Then on the inside, as you see, I left cardboard brown and took a real leaf and held it up and spray painted over it.  This gave it a camouflage look to go with my hunting theme.  I used Rustoleum in Spruce Green for this.

Then after that all was dry, I used some plastic hanger that I had from a display rack for the hanging racks.
I just punched a hole through the cardboard with a knife and stuck in the hangers.


I then just used duct tape for the back to secure them.

 It holds great but is ugly. No one is going to see the back anyways.


And here it is from the front. I had to adjust the duct tape on the back to straighten the pegs though.


Then I took more duct tape,


 to seam off the edges for a cuter, country look.


And here it is all done. Holding the un-packaged DIY Target Ornaments.


 I just printed out a sign that says TARGET ORNAMENTS .99 and glued it to a strip of duct tape for the top sign.



 And for the hanging price tags, I googled, "hit me with your best shot," and found this little black sign. I printed out a sheet of them onto red paper, punched a hole with a hole puncher and wrote the price on the back.


And that was that.
I'll be able to use this camo, country display for lots of items later too.


What do you think about these?
If ya' give them as a git, they can decorate their tree at first, then take them out and fire away!


See ya'll next time,
~Lisa

Aug 11, 2016

DIY BOTTLE CAP PIE MAGNETS

Set of my finished Bottle Cap Pie Magnets in a cookie tin
I wish I could take credit for this cute idea but I can't.  I had never seen any or heard of them before winning an auction box lot full of miniatures last week.  And tucked away in the corner was this single, cute miniature little pie that inspired this DIY bottle cap pie post:

Here was the bottom after I tore off a $3 price tag of old scotch tape.

It wasn't a magnet, but I immediately thought it'd be cute as one. So I had to get to making up a batch and see how they will sell in my new booth.  Oh, here's a few pics of how it's coming along so far.





And now on to making these adorable bottle cap pie magnets.

YOU WILL NEED:
-Salt Dough (Recipe Link) or Polymer Clay (my first batch I'm trying the clay since I have a lot on hand)
-E-6000 Glue
-Round Magnets
-Craft Paint & Spray Paint (optional) but faster for me for larger batches
-Metal Bottle Caps

First off, gather up some metal pop lids.  Oddly, I'd saved these for a while, but I just never new what I'd need them for.
Then take them and lay them out on something, I used a styrofoam plate, and spray paint them the base color you want.  
 
I chose white just because it was what I had on hand.  
 I'd really have  preferred red. But anyways.  One coat was good enough, so I continued.

My next step is totally optional but I love the old enamel speck look it gives so I've gotta show it.
Take some other contrasting color, I choose red for one batch 
 
and blue for another, 
 
and flick specks on using an old toothbrush. 
Just dip the toothbrush in some paint, and run your finger up and down the bristles to let the specks fly. You can add a dab of water if you must, but not too much or it'll look too runny.

And after they dried good, I got out my clay.
Next time I'll use salt dough, but for right now I have plenty of the clay ready.

I went ahead right now and squirted a bit of E-6000 glue into the empty lids, preparing them for the clay. Here's the type I used that I purchased from ebay:

Just pinch you off a bit and shove it in a dry lid to make the pie.
 
Here is a bunch of the tops so you can see the various designs I did. 

Oh, I also went in while the clay was still wet and cut a slit out to make it look like a piece was gone.


Here's another pic to show how I used the tip of an ink pen lid to push in to make fake cherries or what have you:
And with the same pen, I rolled it on top of the clay to give it a woven texture.
Just look around and find items that you can use.  If you notice the edges of these, I took one of the metal bottle caps and rolled it around the edges to give it the crimped look. I really liked that.
Now let them sit to dry. Depending on what type of "pie filling" you used, it depends on the time.  But for my clay I let them sit for about 12 hours.  And then I did a bit of painting.
 As you see,  I just used some craft paint and try to dribble on some sort of pie toppings. And I loved the one that I painted white, like a cake, with red strawberry dots on it. I think that one is my favorite.
 A few of the others I just played around with. And the one with the chocolaty looking runny topping I was trying to go for a drippy look for the edges, but it didn't turn out so good.

And if you noticed, I've got them stashed in an old cookie tin that someone had given me as a gift last year.  I thought it'd be a cute way to transport them to my booth and to display them in.






Also, if you wanted to sell these in a lot of say a dozen or so, it'd be a cute packaging idea to leave them in the tin with the lid!  I may do that also.

But here's some pics of how I've gotten some displayed in my kitchen now:



And again, it'd be a very cute way to give a tin of  Christmas cookies, errrr pies, as a unique Christmas gift!



I'm still on the fence on how to price these. Maybe 2 magnets for a $1.00.

Or .99 cents each? I dunno yet.


 Or if I put around 12 in a tin can, as above, maybe $7.00 or so? What would you think on the pricing?


Hope ya' like this idea and give it a try!
Happy crafting ya'll,
~Lisa